Device Administration & Operation Mode Management
IrisAccess iCAM7 series iris readers can be configured in multiple operational modes which are selectable within the device’s web “WebConfig” application.
Available Operational Modes:
• Operational Mode 1 (Option 1): Networked iCAM Control (iris data processed on PC workstation or on an ICU7000-2 series controller)ally impossible to have a duplicate iris record entry in the system providing unparalleled accuracy. • Operational Mode 3 (Option 3): On-Device iCAM Authentication (1:N / 1:1 and 3 factor authentication.)
Networked iCAM Control / Iris Image Capture Mode
DES and 3 DES encryption options are available. The 3 DES encryption can be set by the end user. Note: The ICU7000-2 is offered as an optional solution for off device matching. In all cases the IrisServer does not have to be online continuously. (*Legacy iCAM4000 series units cannot perform iris matching on the device.) iCAM7 also has an integrated relay (dry contact) and can control a 3rd party door lock controller directly.
The iCAM7 Iris Reader will operate as part of an IrisAccess system for enrollment or recognition when communicating with a computer using Iris Access EAC software, iData EAC Toolkit and or in conjunction with an Identification Control Unit (ICU7000-2).
Typical System Configuration
Enrollment iCAM
Using Smart Card with encoded templates and On-Device Verification Mode
The iCAM7 series iris readers can operate as complete stand-alone authentication readers. For verification (1:1 matching) of iris templates which have been encoded on contactless smart cards. The iris template data is securely stored on the contactless smart card during the enrollment process. When the card is presented to the iris reader, the encrypted templates are read from the card and are compared to the live iris presented.
iCAM7100
iCAM7100
iCAM7100
iCAM7100
iCAM7100
iCAM7100
1
IrisServer PC * Access Control System Host
+
3
Access Control Panel
2
* 1 Access Control System Host & Iris Server Software can reside on the same physical Server PC.
iCAM7 Smart Card Mode
Ethernet
1 2 3
Door Control Wiegand
iCAM7000
Image Capture 2
Match IrisCodes 4
On Iris Reader or Off Iris Reader Matching is possible
Convert to IrisCode
3
Card ID 1003
The iCAM7 series iris readers provide iris identification (biometric matching) inside the device. All iris data and PII (Personally Identifiable Information) is encrypted inside the iCAM.
Access Control Panel
XOR
IrisCode Card ID 1003
Wiegand Out
Present Card and Read: Smart Card has both Card ID and IrisCode
1
Output Card ID via Wiegand Out 5
iCAM7 Option 3 + Option 1
Smart Card
for Option 3
Enrollment iCAM
The verified card ID is output to the 3rd party access control system. This operation does not require a network connection. The iCAM7 series will support virtually any 3rd party wiegand based access control panel.
1
iCAM7100S
iCAM7000
iCAM7100
iCAM7000
Access Control System Host IrisServer PC *
3
+
Access Control Panel
System Requirements for iData™ IrisAccess EAC
2
ICU7000-2
* 1 Access Control System Host & Iris Server Software can reside on the same physical Server PC.
The IrisAccess EAC software – Iris Server, Remote Enrollment stations, remote Iris Monitor stations require a static IP address for the PC on the network.
Ethernet
1 2 3
Door Control Wiegand
IrisAccess EAC supports MS SQL, Oracle, and MS Access database types.
Sample Legacy Configuration
Supported Computer Hardware Recommendations: IrisAccess EAC Software Application and iCAM Entry Application
The diagram below includes the following: Enrollment iCAM in Option 1. Two iCAM4000’s communicating to the ICU7000-2 for matching, and Two iCAM7 Iris Readers in option 3 Mode (on device matching). Many other configurations are possible.
Operating systems – Windows 2000/XP, Windows Vista, Windows 7 , Windows 8.1, Windows 10, Windows 2008 & 2012 server Pentium Compatible 1.8 (or higher) GHz Processor 1 GB or higher Memory (OS dependent) – 10 GB Hard Disk space (or greater) CD/DVD Drive (For Software Installation) – Ethernet Port (100 Mbps recommended). If older generation ICU4000-W (4 Channel) are being used it may be preferable to have 1 Serial Port for ICU configuration OR 1 USB 2.0 (or higher) port using a USB to Serial adapter. Legacy Support – An ICU 7000-2 (Dual channel ICU) is supported with legacy iCAM 4000’s. 1 ICU 7000-2 per 2 iCAM 4000’s. Iris Access EAC 3.10 or higher is required to use the ICU 7000-2.
iCAM7 + Legacy iCAM4000
Enrollment iCAM
iCAM7100
iCAM4000
iCAM4000
iCAM7100
iCAM7100S
1
IrisServer PC * Access Control System Host
+
3
Access Control Panel
2
ICU7000-2
* 1 Access Control System Host & Iris Server Software can reside on the same physical Server PC.
Ethernet
1 2 3
Door Control Wiegand
Powered by FlippingBook