ColorID e-Binder

ADDITIONAL PRODUCT FEATURES ƒ Custom watermark overlay and resin scramble data protection ƒ Password-protected printer operation and AES data encryption ƒ High-capacity ribbon consumables ƒ Resin threshold ƒ Built-in Ethernet and USB connection for centralized or remote ID card issuance. (Note: Ethernet optional on BIS-certified units) ƒ FARGO® Workbench™ diagnostic utility for printer maintenance facilitation, including Color Assist™ spot-color matching ƒ Interoperable with Asure ID® card personalization software for badge design, database management and technology card encoding

ENCODING OPTIONS (Supported smart card and magnetic stripe technologies): ƒ 125kHz (HID PROX) reader ƒ 13.56 MHz (iCLASS® Standard/SE/SR/Seos®, MIFARE® Classic, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder ƒ Contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards ƒ ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2, and 3

SPECIFICATIONS

Print Method

Dye Sublimation / Resin thermal transfer 300 dpi (11.8 dots/mm) continuous tone Up to 16.7 million / 256 shades per pixel

Resolution

Colors

Wide array of ECO-friendly, high-capacity print ribbons from K to YMCKOKO. Laminate patch options from full card coverage and half panel polyester overlaminates to off-the-shelf and fully custom holographic overlaminates are all available from HID. Available print ribbons include: ƒ Full-color with resin black and overlay panel, YMCKO*, 500 prints ƒ Full-color with two resin black panels and overlay panel, YMCKOK*, 500 prints ƒ Full-color with two resin black panels, YMCKK*, 500 prints ƒ Full-color half-panel with resin black and overlay panel, YMCKO*, 850 prints ƒ Full-color half-panel with two resin black panels and overlay panel, YMCKOK*, 650 prints ƒ Full-color half-panel with two resin black panels and overlay panels, YMCKOKO*, 500 prints ƒ Resin black, K*, 3000 prints 6 seconds per card (K*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*) CR-80 (3.375˝L x 2.125˝W / 85.6 mm L x 54 mm W); CR-79 (3.313" L x 2.063" W / 84.1 mm L x 52.4 mm W) CR-80 edge-to-edge (3.36˝L x 2.11˝W / 85.3 mm L x 53.7 mm W); CR-79 (3.3" L x 2.04" W / 83.8 mm L x 51.8 mm W)

Print Ribbon Options

Print Speed**

Accepted Standard Card Sizes

Print Area

Accepted Card Thickness

.009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm

PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish; rewrite

Accepted Card Types

Input Hopper Card Capacity Output Hopper Card Capacity

100 cards (.030˝ / .762 mm)

Up to 100 cards. (.030" / .762 mm)

Card Cleaning Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change Memory 32 MB RAM Software Drivers Windows® 7, 8, 8.1 and 10 (32 bit & 64 bit) / Windows Server 2003, 2008, 2012 Interface USB 2.0, Standard Ethernet with internal print server (Note: Ethernet optional on BIS-Certified Units) Operating Temperature 65° to 80° F / 18° to 27° C Humidity 20–80% non-condensing Dimensions Printer: 9.8" H x 18.7" W x 9.2" D / 249 mm H x 475 mm W x 234 mm D Printer + lam: 18.9" H x 18.7" W x 9.2" D / 480 mm H x 475 mm W x 234 mm D

Printer: 11 lbs / 5 Kg Printer + lam: 20 lbs / 9.1 Kg

Weight

Agency Listings Supply Voltage Supply Frequency

Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC

100-240Vac, 50-60Hz, 1.6 Amps max

50 Hz / 60 Hz

GreenCircle® Certified card printer (base models only without encoders), refillable supply cartridges (ECO), and rewrite technology - no ribbon required Warranty Printer – three years; printhead – three years, unlimited pass with UltraCard®

Environmental Features

Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard / SE / SR / Seos®, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3

Encoding Options (HID Encoders)

Options Single wire Ethernet and USB 2.0 interface for inline printing and encoding are only optional on BIS-Certified Units (note: single wire Ether- net encoding is only available for iCLASS® , MIFARE®, and contact smart card encoding) - Ethernet-enabled printer supports wireless acces- sory; dual-sided printing module; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer cleaning kit; secure proprietary consumables system Software Swift ID™ embedded badging application, FARGO Workbench™ diagnostic utility with Color Assist™ spot-color matching Display Color changing status buttons * Indicates the ribbon type and the number of ribbon panels printed where Y=yellow, M=magenta, C=cyan, K=resin black, O=overlay. ** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.

I

®

North America: +1 512 776 9000 Toll Free: 1 800 237 7769 Europe, Middle East, Africa: +44 1440 714 850 Asia Pacific: +852 3160 9800 Latin America: +52 55 5081 1650 hidglobal .com

© 2017 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, HID Global, the HID Blue Brick logo, the Chain Design and Ultracard, Swift ID, SmartScreen, MIFARE Plus, MIFARE DESfire, MIFARE Classic, iCLASS, Seos, FARGO Workbench and FARGO are trademarks or registered trademarks of HID Global or its licensor(s)/supplier(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. 2017-09-11-fargo-dtc1500-printer-ds-en PLT-03457

An ASSA ABLOY Group brand

Powered by