SPECIFICATIONS
Print Method
Dye-sublimation / resin thermal transfer
Resolution
300 dpi (11.8 dots/mm) continuous tone
Colors
Up to 16.7 million / 256 shades per pixel
Options include easy-to-use ribbon with disposable ribbon cartridge (EZ) and more economical and eco-friendly refill ribbon for cartridge (ECO). Both EZ and ECO: Resin black (standard), 1000 prints EZ only: Full-color with resin black and overlay panel, YMCKO*, 250 prints
Full-color half-panel with resin black and overlay panel, YMCKO*, 350 prints Full-color with two resin black panels and overlay panel, YMCKOK*, 200 prints Full-color with fluorescing, resin black and overlay panel, YMCFKO*, 200 prints Full-color with fluorescing, two resin black panels and overlay panel, YMCFKOK*, 175 prints Resin black and overlay panel, KO*, 500 prints
Print Ribbon Options
Dye-sublimation black and overlay panel, BO*, 500 prints Resin green, blue, red, white, silver, gold, 1000 prints Resin silver and gold metallic, 500 prints Rewrite technology - no ribbon is required
Print Speed**
6 seconds per card (K*); 8 seconds per card (KO*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*)
Accepted Standard Card Sizes
CR-80 (3.375˝ L x 2.125˝ W / 85.6 mm L x 54 mm W); CR-79 adhesive back (3.313˝ L x 2.063˝ W / 84.1 mm L x 52.4 mm W)
Print Area
CR-80 edge-to-edge (3.36˝ L x 2.11˝ W / 85.3 mm L x 53.7 mm W); CR-79 (3.3˝ L x 2.04˝ W / 83.8 mm L x 51.8 mm W)
Accepted Card Thickness
Print only: .009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm; print: .030˝ - .040˝ / 30 mil - 40 mil / .762 mm - 1.02 mm
PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish; rewrite
Accepted Card Types
Input Hopper Card Capacity
Up to 100 cards (.030" / .762 mm)
Output Hopper Card Capacity
Up to 100 cards (.030˝ / .762 mm)
Reject Hopper Card Capacity
Up to 100 cards (.030˝ / .762 mm) - same-side input / output card hopper
Card Cleaning
Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change Memory 32 MB RAM
Windows ® XP / Windows Vista® (32 bit & 64 bit) / Server 2003 & 2008 / Windows ® 7 / Windows ® 8 (32 bit & 64 bit)/ MAC OS X 10.5/10.6/10.7/10.8 (Available soon) / Linux*** (Available soon)
Software Drivers
Interface
USB 2.0 and Ethernet with internal print server
Operating Temperature
65° to 80° F / 18° to 27° C
Humidity
20–80% non-condensing
Single-sided printer: 9.8˝ H x 18.1˝ W x 9.2˝ D / 249 mm H x 460 mm W x 234 mm D Dual-sided printer: 9.8˝ H x 18.7˝ W x 9.2˝ D / 249 mm H x 475 mm W x 234 mm D
Dimensions
Weight
Single-sided printer: 9lbs / 4.1 Kg; dual-sided printer: 11lbs / 5 Kg; printer
Agency Listings
Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC
Environmental Features
ENERGY STAR® qualified card printer (base models only without encoders) and refillable supply cartridges (ECO)
Supply Voltage
100-240Vac, 50-60Hz, 1.6 Amps max
Supply Frequency
50 Hz / 60 Hz
Warranty
Printer – three years; printhead – three years, unlimited pass with UltraCard ®
Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3
Encoding Options
Supported Access Control Credential Programming
iCLASS® Standard/SE/SR/Seos, MIFARE Classic™, MIFARE DESFire® EV1, HID Prox
Options Single wire ethernet and USB 2.0 interface for inline printing and encoding (note: single wire Ethernet encoding is only available for iCLASS®, MIFARE®, and contact smart card encoding); dual-sided printing module; same-side input/output card hopper; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer cleaning kit; secure proprietary consumables system Software Swift ID ™ embedded badging application, FARGO Workbench™ diagnostic utility with Color Assist™ spot-color matching Display User friendly, SmartScreen ™ graphical display Printer Security Printer access password protected
* Indicates the ribbon type and the number of ribbon panels printed where Y=yellow, M=magenta, C=cyan, K=resin black, O=overlay, B=dye sublimation black. ** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print. ***Linux versions: Ubuntu 12.04, Debian 7.0, Fedora 18, Mandriva 2011, Red Hat 6.4, Open Suse 12.3
An ASSA ABLOY Group brand © 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, HID Global, the HID Blue Brick logo, the Chain Design and Ultracard, Swift ID, SmartScreen, MIFARE Plus, MIFARE DESfire, iCLASS and FARGO are trademarks or registered trademarks of HID Global or its licensor(s)/ supplier(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. 2014-02-18-fargo-dtc4250e-printer-ds-en PLT-01775
Powered by FlippingBook